Save 5% off orders over $250 or
10% off orders over $500
Newport Brass 3200_5623 Jeter Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3200-5623/013200-5623/0343200-5623/03N3200-5623/043200-5623/063200-5623/073200-5623/08A3200-5623/103200-5623/10B3200-5623/153200-5623/15A3200-5623/15P3200-5623/15S3200-5623/203200-5623/243200-5623/24A3200-5623/24S3200-5623/263200-5623/303200-5623/523200-5623/563200-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180056486070918005649307091800565090709180056523070918005653007091800565470709180056554070918005657807091800565850709180056608070918005661507091803042420709180056622070918005663907091800566460709180056653070918005666007091800566770709180181232070918005669107091800567140709180056745