Dornbracht 17861888 TARA Hot and Cold Water Dispenser
NOTE: Not compatible with Reverse Osmosis
Compatible with Insinkerator Hot Water Tank HWT-F1000S. Tank and filter not supplied from Dornbracht. More information on tank and filter at
www.insinkerator.com.
In addition, the installation must be above a kitchen sink.
Dornbracht recommends replacing the filter cartridge every six months. Please see the installation manual for more information.
5-3/4 in. projection
Rigid, thermally insulated spout
Laminar stream
Total height: 11-3/8 in.
7-1/8 in. height to aerator / spout outlet
1-3/8 in. hole diameter
Provides filtered, hot water, 199 degrees F maximum temperature
Provides filtered, cold water (not chilled)
Water flow rate limited to 0.5 gpm
Control unit for wall assembly (5-3/8 in. x 6-1/4 in. x 2-3/8 in.)
Electronic valve
Plug-in power supply, 100-230 V, 50-60 Hz, 18 W. Includes country-specific adaptor set.
One lever for hot and cold water
lead-free
Specify finish when ordering.
ADA Compliant
NSF/ANSI 372
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 61
This product contributes to meeting requirements of Green Building Rating Systems
Gross Weight: 6.79 lbs
Gross Height: 3-7/8 in.
Gross Depth: 15 in.
Gross Width: 23-5/8 in.
Country of Origin: Germany
The following part numbers are available by selecting the options above.
17861888-0017861888-0617861888-0817861888-0917861888-1917861888-2817861888-3317861888-4617861888-4717861888-9317861888-99
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
40290117193254029011719332402901189513540290119835424099477073552402901189689740290119572914099477090801409947709081840290119835594029011764004